How do I install my wall lighting?Updated 2 months ago

1. Mark the wall, drill and insert wall plugs:
   • Hold the silver backing plate where you want the lamp, use a level, mark the two hole positions with a pencil.
   • Drill the correct-size holes, insert wall plugs so they sit flush with the wall.
2. Mount the silver plate to the wall:
   • Put the plate on the wall and insert the supplied wall screws through the plate into the plugs.
   • Slide the gold base over and secure with the gold screws
   • Align the gold base and fasten it using the two gold screws on each side.
   • As you tighten the gold screws they should pull the gold base down to the plate and clamp everything flush to the wall.
     

Please note wall fittings are slightly proud and not completely flush, as shown in our product imagery.